excellent heat resistance and physical properties (especially, impact strength), as well as transparency, Polycarbonates (PC) have been used widely in various applications such as electronics, construction materials and…
with their energy-intensive production methods and unpleasant image have become “business as usual”. Polycarbonate (PC) is one example of energy intensive methods that has become one of the largest ... effluent…
Results: The results of the tests showed significant decrease of Impact strength of the polycarbonate after immersion in (2% chlorhexidine) and it continuous decrease in (0.25% NAOCL) while the lowest ... NAOCL), (0.5%…
electrical conductivity of 100 keV N+ ion implanted polycarbonate (PC) to the doses 1x1015, 1x1016 and 5x1016 ions/cm2 has been studied. The electrical conductivity of ion beam modified polycarbonate ... been explained…
good elastic properties was performed. The influence of synthesized polyurethane based on the polycarbonate diol was studied (5,10 and 15% by weight in relation to epoxy), as well
research paper, the Finite Element Analysis is used for the investigation. The modal of polycarbonate bullet proof glass and the abrasive particle is prepared to study the effect of machining
Polycarbonate (PC)/multi walled carbon nanotubes (MWCNTs) nanocomposites with different compositions were produced via melt mixing. The main objective of this study was using of changes in the electrical properties
200W YAG laser with wavelength 1064nm has been used to weld transparent and absorbing Polycarbonate (PC) in lap weld configuration. The force at break of the lap welds was assessed
laser with wavelength 1064 nm has been used to weld transparent and absorbing polycarbonate (PC) in lap weld configuration. The force at break of the lap welds was assessed
element (the specific ligand) along with choice of target analyte. Here we introduce a polycarbonate trek etched (PCTE) nanoporous membrane having a 5nm gold sputtered porous layer to be used
polymerized through simple one-shot polymerization without catalyst by using various ratios of BHIS, polycarbonate diol, polycaprolactone diol, hexamethylene diisocyanate. The molecular weight was increased and the…
elastic characteristics was done in this thesis. The impact of synthetic polyurethane based on polycarbonate diol (5,10, and 15% by weight in proportion to epoxy), as well ... urethane and alternately dispersed flexible…
anatomically shaped implant for lumbar interbody fusion1. A structural, thermal, and mechanical characterisation of polycarbonate porous parts fabricated with varying infill density (25%, 50%, 75%, 100%) and infill…
Flash differential scanning calorimetry was used to study the glass transition temperature of polycarbonate thin films over a range of 22 âÂ?Â? 350 nm. The investigation was made ... film thickness and cooling rate…
good elastic properties was performed. The influence of synthesized polyurethane based on the polycarbonate diol was studied (5,10 and 15% by weight in relation to epoxy), as well
surface coating for medical devices. Growth rate measurements are also reported for polycarbonate and glass surfaces, for comparison. Measurements are made in a medium shear stress fluid environment. The physical
environmentally friendly material. It is obtained from corn or other plants. Fossil-based polycarbonate (PC) is polymerized using bisphenol-A (BPA), whereas bio-based PC is polymerized using isosorbide monomer
Polycarbonate (PC) based composites were fabricated with different concentrations of Multi Walled Carbon Nanotubes (MWCNTs) and were subjected to dynamic impact loading using Split Hopkinson Pressure Bar (SHPB). Impact…
shipping. During sterilization the quality of the products must be maintained. Polysulfone (PS) and polycarbonate (PC) are often used as materials for medical devices. It has been observed that compounds